How Do I Know My Arlo Camera Is Charging

Download Commodity

Download Article

Arlo is a visitor that articles and sells domicile security cameras. The batteries on their devices are simple to recharge. The easiest manner is connecting the camera to a wall outlet with an Arlo USB adapter. If you desire to charge multiple batteries at in one case, use an Arlo power station. If you get through all the necessary steps but your battery won't charge, in that location are a few troubleshooting options you can endeavor to successfully accuse your camera.

1
Move the photographic camera within if you're using it outside. Fifty-fifty if you take a power outlet outside, don't charge the bombardment outdoors. Bring it inside before plugging it in to charge.^[ane]
- Cull a safe spot to charge the camera where information technology won't exist disturbed or stepped on. A countertop or table works best. Don't charge the photographic camera on the flooring unless it's an out of the way spot.
2
Plug the USB charging cable into the camera and wall ability adapter. The charging cablevision has two sides. The smaller side plugs into the back of the camera. Flip the photographic camera effectually and find the slot for the plug. Then plug the larger side of the cable into the wall adapter.^[two]
- Only use Arlo products to charge the battery. Other power units and cables won't work and could damage the photographic camera or battery.
Advert
3
Plug the wall power adapter into a wall socket. When the battery is connected properly, the LED light on the camera blinks blueish. Look for this blinking. So leave the photographic camera to charge.^[3]
- If the blinking annoys you, turn the camera around or cover it with a towel while it charges.
- If the low-cal doesn't blink, cheque your connexion. Make sure all the plugs are fully inserted.
iv
Unplug the camera when the LED low-cal turns solid blueish. When the battery is fully charged, the blue light stops blinking and turns solid. Monitor the camera and unplug it when you see the solid blue light. Then reinstall the camera where it was originally.^[four]
- Arlo camera batteries take two-iv hours to charge, depending on how low the bombardment was. Don't unplug information technology before the light turns solid or you'll have an incomplete charge.

one
Plug in the Arlo charging station. The charging station comes with a USB cablevision and a wall adapter. Plug the minor side of the cable into the charging station and the large side into the adapter. So plug the wall adapter into an outlet.^[5]
- An Arlo power station comes separately from the cameras and base of operations stations. You can get one from an electronics shop or online. Remember that batteries aren't included with the ability station. You only get the charging port, cable, and wall power adapter.
- Brand certain the power station is in a safe place where it won't get knocked over or stepped on.
- Only use Arlo products to accuse the power station. Other USB cables won't piece of work properly.
ii
Open up the bombardment compartment on the camera. Look for a small latch on the top of the camera. Press the latch down with your finger to unlock the battery compartment. While property the latch, use your other manus to lift up the top part of the photographic camera and reveal the battery.^[6]
- Concur onto the camera firmly while opening the compartment. It could slip out of your hands and interruption.
3

Printing down the latch holding the battery in place and slide it out. The battery is held in place with a small latch. Press it downward to costless the battery. And then slide the bombardment out of the compartment.^[7]
4
Slide the battery into the charging bay until it clicks. The power station has ii charging bays, 1 on each side. Accept the battery and line it up with the grooves on the charger. Insert its back side (the black part) into the bay. Press until you lot hear a click, meaning the battery is locked in place. ^[viii]
- Make sure the Arlo symbol is facing up on the battery. That's how you know the battery is facing the right direction.
- Insert another battery into the other side if you lot want to accuse ii at the aforementioned time.
5
Leave the battery in until the LED light turns solid dark-green. While the battery is charging, the LED light will be solid yellowish. When it turns solid green, the battery is charged and yous tin remove it.^[9]
- The power station has a lite for each bombardment. Look at the low-cal closest to the battery to make sure you're checking the right 1.
- The battery will take two-4 hours to accuse, depending on how low the accuse was.
- If the LED blinks xanthous, it means the battery is inserted merely isn't charging. Try removing the battery and reinserting information technology, making sure the grooves are all lined up properly.
vi
Remove the battery past pressing it until it clicks. The click means the battery is complimentary. Then slide it out carefully and insert information technology back into the camera.^[ten]
- Don't elevator the power station when y'all remove the bombardment. It could fall out and break.

1
Check that your attachments are tight. All the plugs you insert should be snug. If your battery won't charge, check each attachment. Make sure the wall adapter is in the outlet, and the USB cable is continued to the adapter and charging unit.^[xi]
- Try removing the cables and wiping off all the connection points with a dry rag. Sometimes dust prevents a good connection. Then plug everything back in.
2
Make sure yous're using Arlo equipment. The batteries and power station won't work without Arlo cables and adapters. Your best bet is using the equipment that came with your photographic camera or power station. These were manufactured and packaged by Arlo. If you bought pieces separately, expect for the Arlo logo on them.^[12]
- If y'all buy replacement cables and adapters from some other seller, bank check for the Arlo logo on them. Also look for a lightning bolt logo, which is the QC ii.0 icon, and an output listed at 9V===1.1A. These are all indications of Arlo-approved adapters.
- If you're using the aforementioned cables and adapters that came with your product, and then the equipment may be defective. Contact Arlo for further help or a replacement. Their 24-hour technical aid number is (408) 638-3750, or you can visit the Contact section on their website at https://world wide web.arlo.com/en-the states/online-store/contact-us.aspx##targetText=For%20technical%20support%20or%20warranty,mean solar day%2C%207%20days%20a%20week.
iii
Log into your Arlo account and encounter if the charging icon is there. If you're trying to charge the battery and the LED isn't lighting up, the lite may be defective. Ostend if the camera is charging by logging into your Arlo account. If you encounter the charge icon on the homepage, the camera is charging. If not, then something is wrong with the connexion.^[xiii]
- This option only works if y'all're charging your battery while information technology'southward still in the camera. Information technology won't piece of work if you're using the power station.
iv
Reset your camera to its factory settings. Sometimes a software outcome prevents the camera from charging. Accept your Arlo base of operations station and notice the Reset button on the back. Press that push in with a pen or paperclip and hold it for 10 seconds. The LED will then wink xanthous, and the system reboots. This resets the system to its default settings. When the LED turns solid green, set up your camera again.^[14]
- After the base station reboots, select New Organization Setup from your online Arlo business relationship. Follow the steps to reconnect the camera to your WiFi.
- If your battery still won't charge, contact Arlo for farther support.